Adaptec DuraStor 7220SS User Manual page 46

Table 3-1 Configuration Information (Continued)
Group
SEP
To display hardware information only:
1
From the System Menu, select Utilities Menu and press Enter.
The Utilities menu appears.
2
Select Hardware Information and press Enter.
The Hardware Information window appears.
3
Press Esc to return to the Utilities menu.
To display hardware and configuration information:
1
From anywhere in Adaptec Disk Array Administrator, press
CTRL-E.
The Event Log screen appears.
2
Press CTRL-E again.
The HW Info window appears.
3
Press CTRL-E again.
The CFG Info window appears.
You can press Esc to return to the previous window.
4
Press CTRL-E or Esc to return to where you started from.
Field
Poll Rate
Temperature
Slot Flags
Global Flags
Monitoring System Status
What Displays
Number of seconds as set in
Adaptec Disk Array
Administrator.
ON or OFF as set in Adaptec
Disk Array Administrator.
ON or OFF as set in Adaptec
Disk Array Administrator.
ON or OFF as set in Adaptec
Disk Array Administrator.
3-6