Changing An Array Name; Changing Array Ownership - Adaptec DuraStor 7220SS User Manual

2 Select the array you want and press Enter.
That array's Array menu appears.
3 Select Expand Function and press Enter.
That array's Expand menu appears.
4 Select View Expand Status and press Enter.
The Expand Status window appears.
5 Press Esc to return to the Expand Function menu.

Changing an Array Name

You can change the name of an array. This does not affect the target
ID or LUN values of the array. The controller does not allow you to
change an array name when a utility is running.
To change an array name:
1 From the System Menu, select Array Menu and press Enter.
The Select Array menu appears.
2 Select the array you want and press Enter.
That array's Array menu appears.
3 Select Change Array Name and press Enter.
The Enter New Name prompt appears.
4 Type the name you want to use and press Enter.
You can use up to 35 characters. You can include any characters
in the name, including spaces.
The system confirms that you want to make the change.
5 Select Yes and press Enter.

Changing Array Ownership

If you are using active-active mode, you can change the ownership
of any array between the controllers.
You might want to change ownership if you plan to replace or
repair one controller. Changing ownership lets you continue using
an array without interruption and makes the array visible on the
Creating and Managing Arrays and Partitions
2-18