Shutting Down The Other Controller; Shutting Down Both Controllers - Adaptec DuraStor 7220SS User Manual

2
Select Other Information and press Enter.
The Other Information window appears.
3
Press Esc to return to the Other Controller menu.

Shutting Down the Other Controller

You can gracefully shut down the other controller if you are
preparing to replace it or power off the RAID appliance. Always
use the Shutdown Other Function in preference to the Kill Other
Function. (See Killing the Other Controller on page 5-13
when to use the Kill Other Function.)
To shut down the other controller:
1
From the System Menu, select Other Controller Menu and
press Enter.
The Other Controller menu is only available if the system is
configured to run in active-active mode.
The Other Controller menu appears.
2
Select Shutdown Other and press Enter.
The system confirms that you want to make the change.
3
Select Yes and press Enter to make the change.
The other controller shuts down gracefully.
4
Press Esc to return to the Other Controller menu.

Shutting Down Both Controllers

You can gracefully shut down both controllers simultaneously if
you are preparing to replace them both or power off the RAID
appliance.
To shut down both controllers:
1
From the System Menu, select Other Controller Menu and
press Enter.
The Other Controller menu is only available if the system is
configured to run in active-active mode.
The Other Controller menu appears.
Configuring the Controller
for details on
5-12