To change a partition name:
1 Display the Partition Menu. See
instructions.
2 Select Change Partition Name and press Enter.
The Enter New Name prompt appears.
3 Type the name you want to use and press Enter.
You can use up to 35 characters. You can include any characters
in the name, including spaces.
The system confirms that you want to make the change.
4 Select Yes and press Enter.
Changing a Partition LUN
You can change the LUN assigned to a partition as it appears under
the controller's target ID from the host system's point of view. The
change takes place immediately; however, you may need to reboot
the host system to see the partition at the new LUN.
Note: You cannot change the partition's LUN to one that is
already in use. If you want to use a LUN that is already in
use, you must first reassign that LUN.
For more information about LUNs and your controller, see
Understanding LUNs and Viewing LUN Information on page
To change a partition LUN:
1 Display the Partition Menu. See
instructions.
2 Select Change LUN and press Enter.
The New LUN prompt appears.
3 Type the LUN you want to use and press Enter.
The system confirms that you want to make the change.
4 Select Yes and press Enter.
Creating and Managing Arrays and Partitions
Step 1 on page 2-25
Step 1 on page 2-25
for
5-5.
for
2-28