Check Fill Level - Manitowoc GHC75 Maintenance Instructions Manual

Machine

Check fill level

lubrication point
Slewing ring, outer
Lubrication plan, undercarriage
3.4 Check fill level
Personnel
The machine operator
26
Remove the excess grease and dispose of it correctly.
7.
1. Clean the slewing ring gears down to the bare metal.
Spray the gearing from approx. 30 cm away with GROVE
2.
gear spray.
Slew the upper carriage several times.
3.
ð The layer of lubricant will spread evenly across the gears.
lubrication point
Pushbeam sliding
surfaces
Extend the undercarriage.
1.
2. Remove dirt and old grease from all sides of the pushbeam
and the center frame.
Clean the surfaces of the pushbeam and the center frame
3.
with a solvent.
Apply a thin layer of lubricating grease with a brush.
4.
Interval
Every 10 OH / daily
Once every 250 OH / approx. 4-6 weeks after commissioning
Preliminary
GHC75 Telescopic crane
City
The pushbeams are on the left and on the
right, between center frames and track
wheel carriers.
Crane Care
21.12.2017