14/LIGHT SYSTEM, INSTRUMENTS
Changing the low beam bulb
17.15
Note
Damage to reflector Keep the glass of the bulb free of grease.
–
Clean the glass bulb with a clean cloth before mounting. Any grease on the glass will evaporate by the heat and be deposited on
the reflector.
–
Position the lug
–
Check lighting function.
400422-12
–
Position cover.
Info
Check for correct positioning and freedom of movement of the brake lines.
–
Mount and tighten screws
Guideline
Remaining chassis screws
700335-11
–
Switch off all power-consuming components and switch off the engine.
–
Fold up the combination instrument. Pull the lug
–
Remove the rubber holder.
700293-01
–
Release the latch
–
Remove the lamp cover
700294-01
of the lamp cover in the notch. Engage the latch.
.
M6
.
.
10 Nm (7.4 lbf ft)
out of the rubber holder
66
.