16 ELECTRICAL SYSTEM
16.9
Note
Damage to reflector Grease on the reflector reduces the brightness.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
226
Changing the low beam bulb
Preparatory work
–
Switch off the ignition by turning the black ignition key to the
position OFF
.
–
Remove the seat. (
p. 133)
–
Remove the front side cover. (
–
Remove the tank cover. (
–
Remove the mask spoiler.
–
Remove the wind shield. (
–
Remove the headlight mask with the headlight. (
p. 148)
p. 160)
(
p. 150)
p. 164)
p. 223)