30/ENGINE
30/ENGINE
18
Removing the engine
18.1
–
Jack up the motorcycle rear end. (
–
Dismount the fuel tank. (
–
Remove the inside cover. (
–
Remove the air filter. (
–
Remove the filter box bottom. (
–
Remove the radiator. (
–
Remove rear screw
–
Remove the screw of ground connector
–
Remove the screws of SLS cover
200509-10
–
Push back protective cover
motor. Remove the cable.
–
Unplug the connector of oil pressure sensor
–
Unplug the connector of the coolant temperature sensor
200510-10
–
Remove the screws of SLS cover
200511-10
–
Remove cable protector
–
Unplug connector
–
Remove the exhaust system. (
200512-10
–
Unplug the connector of ignition coils
200520-10
p. 9)
p. 32)
p. 36)
p. 28)
p. 28)
p. 146)
of the starter motor.
.
. Take off the SLS cover.
. Unscrew the electrical connection from the starter
.
. Take off the SLS cover.
.
of the gear position sensor and of the side stand switch.
p. 24)
.
70
.