16
ELECTRICAL SYSTEM
16.9
Changing the low beam bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Check the headlight setting. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the passenger seat. (
–
Remove the driver's seat. (
–
Remove the front side cover. (
–
Remove the tank cover. (
–
Remove the mask spoiler.
–
Remove the wind shield. (
–
Remove the headlight mask with the headlight. (
Main work
–
Push headlight bulb
wise, and pull it out.
–
Unplug connector
S00297-10
p. 178)
p. 107)
p. 108)
p. 121)
p. 129)
(
p. 123)
p. 132)
lightly into the bulb socket, turn it all the way counterclock-
.
p. 171)
174