Changing The Low Beam Bulb - KTM 1290 SUPER ADVENTURE Owner's Manual

16 ELECTRICAL SYSTEM
16.10

Changing the low beam bulb

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the wind shield. (
–
Loosen the mask spoiler. (
–
Remove the headlight mask with the headlight. (
Main work
–
Push headlight bulb
wise, and pull it out.
–
Unplug connector
M00850-10
p. 150)
p. 140)

lightly into the bulb socket, turn it all the way counterclock-

.
p. 191)
195