Table of Contents
Advertisement
13/BRAKE SYSTEM
Adjusting the footbrake pedal stub
16.9
Adjusting the footbrake pedal
16.10
–
Stand the vehicle upright.
–
Remove screw cover
–
Top up the brake fluid to MAX level.
Brake fluid DOT 4 / DOT 5.1 (
–
Refit screw with membrane.
Info
Clean up overflowed or spilt brake fluid immediately with water.
700265-01
–
Remove the screw
–
Position the footbrake pedal stub with the screw in one of the holes
the desired lever length.
Guideline
Standard
–
Tighten screw.
Guideline
Screw, footbrake pedal
stub
700305-01
–
Use the tool to press in the anti-rotation lock
Info
The range of adjustment is limited.
–
Remove the tool.
The spring tension on the anti-rotation lock is released and the hex nut is
locked.
700345-01
–
Check the footbrake pedal setting.
Info
Position
ting.
700346-01
with membrane
.
p. 192)
with the footbrake pedal stub.
Central hole
M6
of the shift lever can vary considerably, depending on the set-
according to
10 Nm
Loctite
®
243™
(7.4 lbf ft)
, then turn the piston rod
56
.
Advertisement
Table of Contents
