14/LIGHT SYSTEM, INSTRUMENTS
Setting the blank time of the LAP button LAP BLANK T
17.5
Setting number of laps SET NUM LAPS
17.6
Condition
The ignition is on.
The motorcycle is standing.
–
Press the button
–
Press the button
–
Press the button
–
Press the MODE button briefly.
LAP BLANK T. appears on the info display.
Info
At delivery, LAP BLANK T. is set to 1 second.
400461-01
Tip
With LAP BLANK T., you can prevent the lap from being timed too short. This
may happen if you accidentally press the LAP button twice in a row.
–
Set the blank time of the LAP button with the button
Info
LAP BLANK T. can be set between 1 and 200.
–
Press the MODE button briefly.
The settings are stored and the display changes to the SETTINGS menu.
–
Press the button
info display.
–
Press the MODE button briefly.
–
Press the button
the info display.
–
Press the MODE button briefly.
Condition
The ignition is on.
The motorcycle is standing.
–
Press the button
–
Press the button
–
Press the button
play.
–
Press the MODE button briefly.
TOTAL LAPS appears on the info display with the number of laps.
Info
When delivered, the number of TOTAL LAPS is set to 99 laps.
400462-01
–
Set the number of laps with the button
Info
You can set TOTAL LAPS to between 1 and 99 laps.
–
Press the MODE button briefly.
The settings are stored and the display changes to the SETTINGS menu.
–
Press the button
info display.
–
Press the MODE button briefly.
–
Press the button
the info display.
–
Press the MODE button briefly.
and the button
for 3 - 5 seconds.
twice until the symbol
is on SETTINGS in the info display.
is on LAP BLANK T in the info display.
once until the symbol
briefly and repeatedly until the symbol
briefly and repeatedly until the symbol
and the button
for 3 - 5 seconds.
twice until the symbol
is on SETTINGS in the info display.
twice until the symbol
is on SET NUM LAPS in the info dis-
or the button
briefly and repeatedly until the symbol
briefly and repeatedly until the symbol
61
or the button
.
is on BACK... in the
is on EXIT SETUP in
.
is on BACK... in the
is on EXIT SETUP in