Changing The Low Beam Bulb - KTM 1050 Adventure Owner's Manual

16 ELECTRICAL SYSTEM
16.9

Changing the low beam bulb

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
–
Remove the front side cover. (
–
Remove the tank cover. (
–
Remove the mask spoiler.
–
Remove the wind shield. (
–
Remove the headlight mask with the headlight. (
Main work
–
Push headlight bulb
wise, and pull it out.
–
Unplug connector
S00297-10
p. 97)
p. 109)
p. 117)
( p. 111)
p. 121)

lightly into the bulb socket, turn it all the way counterclock-

.
p. 158)
160