Changing The Low Beam Bulb - KTM 1190 RC8 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Changing the low beam bulb

9.60
Note
Damage to reflector Keep the glass of the bulb free of grease.
–
Clean the glass bulb with a clean cloth before mounting. Any grease on the glass will evaporate by the heat and be deposited on the
reflector.
–
Use spare fuses with the correct rating only.
Fuse (75011088010) (
Fuse (75011088015) (
Info
If the new fuse burns out after it is inserted, it is important that you contact an
authorized KTM-RC8 workshop.
Tip
Replace the spare fuse in the fuse box so that it is available if needed.
–
Close the fuse box cover.
–
Fit the seat. ( p. 146)
–
Switch off all power consumers and switch off the engine.
p. 217)
p. 217)
158