KTM 1190 RC8 EU 2008 Repair Manual page 21

03/FRAME
–
Tighten screw
Guideline
Screw, subframe
700330-01
Setting a lower seat position:
–
Remove screw
–
Push the rear end down until the drill holes of the frame are level with the
upper rear drill holes of the rear.
–
Mount the screw and washer on the left and right sides of the vehicle, but do
not tighten.
700327-12
–
Remove screw
–
Push the rear end up until the drill holes of the frame are level with the upper
front drill holes of the rear.
700327-14
–
Mount the screw and washer on the left and right sides of the vehicle, and
tighten.
Guideline
Screw, subframe
700329-01
–
Tighten screw
Guideline
Screw, subframe
700327-13
on the left and right sides of the vehicle.

M8
with washer on the left and right sides of the vehicle.

with washer on the left and right sides of the vehicle.

M8
on the left and right sides of the vehicle.

M8
25 Nm Loctite ® 243™
(18.4 lbf ft)
25 Nm Loctite ® 243™
(18.4 lbf ft)
25 Nm Loctite ® 243™
(18.4 lbf ft)
19