Changing The Low Beam Bulb - KTM 1190 RC8 R Owner's Manual

14 ELECTRICAL SYSTEM
14.6

Changing the low beam bulb

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Close the fuse box cover.
Finishing work
–
Fit the seat. (
Preparatory work
–
Switch off all power consumers and the engine.
Main work
–
Fold up the combination instrument. Pull the lug
–
Remove the rubber retainer.
100742-10
p. 168)
out of the rubber retainer
1
210
.
2