30/DISASSEMBLING THE ENGINE
Removing the transmission shaft
19.41
–
Remove internal rotor
–
Remove external rotor
200426-10
–
Remove shift rails
200427-10
–
Swing shift forks
Info
Make sure not to misplace shift rollers
–
Remove shift drum
200428-10
–
Remove shift forks
Info
Make sure not to misplace the shift rollers.
200429-10
–
Place the engine in an upright position.
–
Remove lock ring
200430-10
–
Pull both transmission shafts out of the bearing seats together.
200431-10
and pin
from the oil pump shaft
.
.
to one side.
.
.
and the stop disk.
.
.
91