Removing The Heat Exchanger; Removing The Rear Timing Chain Tensioner; Removing The Rear Camshaft - KTM 1190 RC8 EU 2008 Repair Manual

30/DISASSEMBLING THE ENGINE

Removing the heat exchanger

19.8

Removing the rear timing chain tensioner

19.9

Removing the rear camshaft

19.10
–
Remove screws
–
Remove the heat exchanger.
200314-10
–
Remove O-rings
–
Remove seal
200315-10
–
Remove screw
–
Pull out timing chain tensioner
200316-10
–
Remove spark plug shaft insert
–
Loosen and remove screws
Info
The cams should not activate the valves.
–
Remove the camshaft bearing bridge.
200318-10
–
Raise the camshaft at the rear and take the timing chain off of the rear sprocket.
Remove the camshaft.
200319-10
of heat exchanger .
 
and sleeves .
 
.

with O-ring .
 
.

.

from the outside to the inside.

79