Selecting A Riding Mode - Motorcycle Stationary - Triumph Street Triple S Owner's Handbook Manual

General Information
• The trip screen and the current
riding mode is shown.
Current Riding Mode
• To select a riding mode, see page 86.
Selecting a Riding Mode –
Motorcycle Stationary
To select a riding mode when the
motorcycle is stationary:
• Press and release the MODE button
on the left handlebar switch housing
until the required riding mode is
flashing in the display.
1. Selected riding mode (flashing)
2. Current (active) riding mode
92
1
2
• The selected
automatically activated one second
after the MODE button is pressed, if
the following conditions are met:
With the Engine Off
• The ignition is switched ON.
• The engine stop switch is in the
RUN position.
With the Engine Running
• Neutral gear is selected or the
clutch is pulled in.
1. Selected riding mode
• Once the ABS,
settings have changed, the selected
riding mode will be shown and the
previous mode will no longer be
shown.
riding mode is
1
MAP and TTC