Front Suspension Compression And Rebound Damping Adjustment; Front Fork Inspection - Triumph Thruxton TFC 2019 Owner's Handbook Manual

Front Suspension Compression and
Rebound Damping Adjustment
The compression damping adjuster is
located at the top of the left hand fork,
and the rebound damping adjuster is
located at the top of the right hand fork.
1. Front suspension compression and
rebound damping adjusters
To change the compression damping
setting:
• Rotate the adjuster clockwise to
increase, or counterclockwise to
decrease using a 0.12 in (3 mm) Allen
key.
• Always count the number of clicks
from the fully clockwise position
noting that the first stop (click
position) is counted as zero.
To change the rebound damping setting:
• Rotate the adjuster clockwise to
increase, or counterclockwise to
decrease using a 0.12 in (3 mm) Allen
key.
• Always count the number of clicks
from the fully clockwise position
noting that the first stop (click
position) is counted as zero.
1
Maintenance and Adjustment

Front Fork Inspection

Riding the motorcycle with defective
or damaged suspension is dangerous
and may lead to loss of control and an
accident.
Never attempt to dismantle any part
of the suspension units
All suspension
pressurized oil.
Skin and eye damage can result from
contact with the pressurized oil.
Front fork inspection
To inspect the forks:
• Position the motorcycle on level
ground.
• While holding the handlebars and
applying the front brake, pump the
forks up and down several times.
• If roughness or excessive stiffness
is detected, consult your authorized
Triumph dealer.
Warning
Warning
units contain
97