Front Suspension Preload Adjustment - Thruxton R Only; Front Suspension Rebound And Compression Damping Adjustment - Thruxton R Only - Triumph T120 Owner's Manual

Front Suspension Preload
Adjustment - Thruxton R Only
1
ciys
1. Front suspension preload adjuster
The preload adjuster is located at the
bottom of the front suspension unit.
To change the preload, rotate the
adjuster clockwise
anticlockwise to decrease using the
Allen key located in the right hand side
panel.
Always count the number of turns from
the fully clockwise position noting that
the first turn is counted as zero.
Note:
• The motorcycle is delivered from
the factory
adjuster set at the Solo Riding
settings, as shown in the relevant
suspension chart (see page 100).
to increase,
with the preload
Front Suspension Rebound and
Compression Damping Adjustment -
Thruxton R Only
ciyt
Front suspension rebound and
compression damping adjusters
The rebound and compression damping
or
adjusters are located at the top of each
fork.
To change the rebound damping setting,
rotate the
clockwise to increase, or anticlockwise
to decrease.
To change the compression damping
setting, rotate the COM slotted adjuster
clockwise to increase, or anticlockwise
to decrease.
Always count
anticlockwise
clockwise position.
Note:
• The motorcycle is delivered from
the factory with the rebound and
compression damping adjusters set
at the Solo Riding settings, as
shown in the relevant suspension
chart (see page 100).
Maintenance
TEN slotted adjuster
the number
turns from the
of
fully
101