Table of Contents
Advertisement
Time(hh:mm:ss) Alarm
Note: If you have change the setting, you must let the system boot up until it goes
to the operating system, before this function will work.
Reload Global Timer Events
Reload Global Timer events are I/O events whose occurrence can prevent the
system from entering a power saving mode or can awaken the system from such a
mode. In effect, the system re mains alert for anything which occurs to a device
which is configured as Enabled , even when the system is in a power down mode.
IRQ[3-7,9-15], NMI
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Floppy Disk
Serial Port
Parallel Port
6.1.7 PNP/PCI Configuration Setup
This section describes configuring the PCI bus system. PCI, or Personal Computer
Interconnect, is a system which allows I/O devices to operate at speeds nearing the
speed the CPU itself uses when communicating with its own special components.
This section covers some very technical items and it is strongly recommended that
only experienced users should make any changes to the default settings.
You can choose what hour, minute and second the
system will boot up.
Figure 6-7: PNP/PCI configuration screen
MIC-3366 Series User Manual -- Page 42
Advertisement
Table of Contents
