Video Off Method
This determines the manner in which the monitor is blanked. V/H SYNC+Blank This
selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen
DPMS (default)
Suspend Type
Select the Suspend Type. The settings are: PWRON Suspend, Stop Grant.
Modem Use IRQ
This determines the IRQ in which the MODEM can use.
The settings are: 3, 4, 5, 7, 9, 10, 11, NA.
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the CPU
will be shut off. The settings are: 1/2/4/8/12/20/30/40 Min, 1 Hour, and Disabled.
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive will be
powered down while all other devices remain active. The settings are:
1/2/3/4/5/6/7/8/9/10/11/12/13/14/15Min and Disabled.
Power On by Ring
During Disabled, the system will ignore any incoming call from the modem.
During Enabled, the system will boot up if there's an incoming c all from the modem.
Resume by Alarm
This function is for setting date and time for your computer to boot up. During
Disabled, you cannot use this function. During Enabled, choose the Date and Time
Alarm:
Date(of month) Alarm
for HDD Power Down which ranges from 1 min. to 15 min.
and disable.
This option only writes blanks to the video buffer.
Initial display power management signaling.
You can choose which month the system will boot up.
Set to 0, to boot every day.
MIC-3366 Series User Manual -- Page 41
Need help?
Do you have a question about the CompactPCI MIC-3000 Series and is the answer not in the manual?