2.1 Initial inspection Warning! We strongly recommend that only qualified, experi- enced personnel install or remove components and that they practice extreme caution when doing so. MIC-3021/8 User's Manual...
Page 15
2.2 The MIC-3021/8 Chassis Optional system alarm and monitor module System slot Power on/off switch Device protection Fan tray door Device trays Figure 2-1: Front view of MIC-3021/8 Chapter 2 Installation...
Page 16
Optional system alarm and monitor module I/O Power supply switch Figure 2-2: Rear view of MIC-3021/8 MIC-3021/8 User's Manual...
2.3 Installation Procedures 2.3.1 Card Installation and Removal To install a card: Caution: Keep your fingers away from the latch hinges to prevent your fingers from getting pinched. Chapter 2 Installation...
Page 18
Note: If the card is correctly positioned and has been slid all the way into the chassis, the handles should match the rectangular holes. If not, remove the card from the card guide and repeat step 3 again. Do not try to install a card by forcing it into the chassis.
Page 19
To remove a card: 2.3.2 Before Operating the System Chapter 2 Installation...
Page 20
2.3.3 Installing Peripherals Figure 2-4: Install a device on the top tray MIC-3021/8 User's Manual...
Page 21
Figure 2-5: Attaching the mounting brackets to a 5.25" device Chapter 2 Installation...
Page 22
Figure 2-6: Attaching mounting brackets to a half-height device for mounting in device space next to the fan tray module 2.3.4 Replacing the Fan Tray and Air Filter MIC-3021/8 User's Manual...
Need help?
Do you have a question about the CompactPCI MIC-3021/8 and is the answer not in the manual?
Questions and answers