Overview; System Requirements; Installation Preparation - Advantech CompactPCI MIC-3000 Series User Manual

5.1 Overview

The MIC-3366 Platform Software is a system software which works cooperatively
with System CPU board to provide proper functionality of the following features:
- CompactPCI hot swap
- Emulated networking on CompactPCI
This software consists of two parts: hot swap drivers and AdvanNet driver.
This chapter describes the driver's installation procedures respectively.

5.2 System Requirements

1. The software included with this distribution package is designed to work on the
MIC-3366 Peripheral board. It is not guaranteed to work properly on other platforms.
Advantech is not liable for any damage or failure because of using the software on
other platforms.
2. One of the following operating systems must be fully installed and running on the
MIC-3366 Peripheral board before installing this software:
- Microsoft(r) Windows* 2000 5.00.2195 w/wo Service Pack
- Microsoft(r) Windows* XP
3. It is recommended that the software be installed on systems with at least 128MB
of system memory.

5.3 Installation Preparation

1. Verify that all system requirements have been met as described in section 5.2.
2. The Advantech MIC-3366 Platform Software package contains the following
items:
Directories and Files
-----------------------------------
\MIC3366\AdvanNet\WIN2K
\MIC3366\AdvanNet\HSMON
\MIC3366\AdvanNet\README.TXT -- This file
The INF files in subdirectory <CDROM>:\MIC3366\WIN2K are used to install the
5.10.2600
-- Subdirectory for the device drivers
-- Subdirectory for hot swap monitor
MIC-3366 Series User Manual -- Page 25