.
Figure 6-2: Standard CMOS setup screen
PrimaryMaster/PrimarySlave/SecondaryMaster/Secondary Slave
Press PgUp/<+> or PgDn/< - > to select Manual, None, Auto type. Note that the
specifications of your drive must match with the drive table. The hard disk will not
work properly if you enter improper information for this cat egory. If your hard disk
drive type is not matched or listed, you can use Manual to define your own drive
type manually. If you select Manual, related information is asked to be entered to
the following items. Enter the information directly from the keyboard. This
information should be provided in the documentation from your hard disk vendor or
the system manufacturer.
6.1.3 Advance BIOS Features Setup
The "Advance BIOS FEATURES" screen will appear after the BIOS FEATURES SETUP
item from the CMOS SETUP UTILITY Menu was chosen. This screen allows the user
to configure the MIC-3366 according to his particular requirements. Below are some
major items that are provided in the BIOS FEATURES SETUP screen:
MIC-3366 Series User Manual -- Page 32
Need help?
Do you have a question about the CompactPCI MIC-3000 Series and is the answer not in the manual?