Daq Setup And Configuration; Device Setup - Advantech MIC-1816 Series User Manual

2.5

DAQ Setup and Configuration

MIC-1816 features a built-in MIOE-3816 DAQ card. The Advantech Navigator pro-
gram is a utility for setting up, configuring, and testing MIOE-3816. The system set-
tings are stored on the system registry and used when Advantech device driver APIs
are called.
2.5.1

Device Setup

1. To install the I/O device for the MIOE-3816 DAQ card, first run the Advantech
Navigator program (by accessing Start/Programs/Advantech Automation/
DAQNavi/Advantech Navigator).
2. Users can then view the device(s) already installed (if any) via the Installed
Devices list. After the software and hardware installation are complete, the
MIOE-3816 card should be included in the Installed Devices list.
MIC-1816 User Manual
Figure 2.2 MIOE-3816 Device Setting
10