Table of Contents
Advertisement
a Windows* 2000 system .
4. Install the Hot Swap Monitor on Windows* 2000/XP:
Execute the program Setup.exe under the subdirectory
<CDROM>:\MIC3366\ADVANNET\HSMON by either using Windows Explorer to
point to the program or clicking on "Start" and then "Run" to run the program.
Follow the on-screen instructions to complete the setup.
5.5 Verifying Installation of the Software
Run Device Manager to verify the correct installation and usage of the "INF" files.
For Windows* 2000/XP:
1. Click on Start.
2. Select Settings.
3. Select Control Panel.
4.
Double-click on System icon.
5. Click on Hardware tab.
6. Click on Device Manager button.
7. From the View menu, select menu item Devices by type.
8. Click on System devices. An MIC-3366 icon should be displayed. Right-click
on the MIC-3366 icon and select "Properties". If the Hot Swap driver is
installed successfully, the device status should read as "This device is
working properly."
5.6 Installing the AdvanNet Software
1. Add the AdvanNet Adapter
a. Click on "Start".
b. Select "Settings".
c. Select "Control Panel".
d. Double-click on the "Add/Remove Hardware" icon.
e. Select "Next" to enter the Add/Remove Hardware Wizard
f. Select "Add/Troubleshoot a device" and click on "Next"
g. Select "Add a new device" from the device list and click on "Next"
h. In "Find new hardware" page, select "NO, I want to select the hardware from
a list" and click on "Next"
i. Select "Network adapters" from hardware types, then click on "Next"
MIC-3366 Series User Manual -- Page 27
Advertisement
Table of Contents
