Table of Contents
Advertisement
SQV 05.2
SQV 14.2 / SQRV 05.2
ACV 01.2 Non-Intrusive Profibus DP
4.
Transport und Lagerung
4.1.
Transport
Gewichte
SQRV 14.2 Control unit: electronic (MWG)
For transport to place of installation, use sturdy packaging.
Suspended load!
Death or serious injury.
Do NOT stand below suspended load.
Attach ropes or hooks for the purpose of lifting by hoist only to housing and NOT
to handwheel.
Actuators mounted on valves: Attach ropes or hooks for the purpose of lifting
by hoist to valve and NOT to actuator.
Actuators mounted to gearboxes: Attach ropes or hooks for the purpose of lifting
by hoist only to the gearbox using eyebolts and NOT to the actuator.
Actuators mounted to controls: Attach ropes or hooks for the purpose of lifting
by hoist only to the actuator and NOT to the controls.
Respect total weight of combination (actuator, actuator controls, gearbox, valve)
Secure load against falling down, sliding or tilting.
Perform lift trial at low height to eliminate any potential danger e.g. by tilting.
Figure 10: Example: Lifting the actuator
Delicate cooling fins, risk of damage!
During transport or assembly without the supplied transport protection, the cooling
fins may either break or bend if they hit other objects during inappropriate transport.
During transport and installation, leave the supplied cooling fin transport protec-
tion on the cooling fins.
Table 3:
Weight for ACV 01.2 actuator controls
with electrical connection type:
AUMA plug/socket connector with screw-type connection
Transport und Lagerung
Weight approx. [kg]
7
13
Advertisement
Table of Contents
