Password Change; Language In The Display; Language Change - AUMA SQV 05.2 Operation Instructions Manual

Operation
7.4.2.

Password change

Select main menu
Change passwords
7.5.

Language in the display

7.5.1.

Language change

38
SQV 05.2 SQV 14.2 / SQRV 05.2
3. Use push buttons
4.
Confirm first digit of password via push button
5. Repeat steps 1 and 2 for all further digits.
Having confirmed the last digit with
user level is possible if the password entry is correct.
Only the passwords of same or lower access level may be changed.
Example: If the user is signed in as Specialist (4), he/she can change passwords as
for password levels (1) through (4).
Device configuration M0053
Service functions M0222
Change passwords M0229
Menu item Service functions M0222 is only visible, if user level Specialist (4) or higher
is selected.
1. Set selector switch to position 0 (OFF).
2. Press push button C Setup and hold it down for approx. 3 seconds.
Display goes to main menu and indicates: ▶ Display
3. Select parameter Change passwords either:
click via the menu
via direct display: press
- Display indicates: ▶ Change passwords
- The user level is indicated in the top row (1
- For user level 1 (view only), passwords cannot be changed. To change pass-
words, you must change to a higher user level. For this, enter a password via
a parameter.
4. For a user level between 2 and 6: Press push button
The display indicates the highest user level, e.g.: For user 4
5. Select user level via push buttons
Display indicates: ▶ Change passwords Password 0***
6. Enter current password (→ enter password).
Display indicates: ▶ Change passwords Password (new) 0***
7. Enter new password (→ enter password).
Display indicates: ▶ Change passwords For user 4 (example)
8.
Select next user level via push buttons
via Esc.
The display language can be selected.
Display M0009
Language M0049
SQRV 14.2 Control unit: electronic (MWG)
ACV 01.2 Non-Intrusive Profibus DP
Up ▲ Down ▼ to select figures 0 to 9.
Ok, access to all parameters within one
to parameter, or
and enter ID M0229
6), e.g.:
Up ▲ Down ▼ and confirm with
Up ▲ Down ▼ or cancel the process
Ok.
Ok.
Ok.