GAS GAS EC 350F Owner's Manual page 79

Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and clutch lines are not designed for
DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid corrodes paint.
Only use clean brake fluid from a sealed container.
–
Move the hydraulic clutch fluid reservoir mounted on the handlebar
into a horizontal position.
–
Remove screws
–
2
Take off cover
F03222-10
–
Fill bleeding syringe
Syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
–
On the clutch slave cylinder, remove the protection cap, remove
5
bleeder screw
F03224-10
–
Now inject fluid into the system until it escapes from the openings
6
of the master cylinder without bubbles.
–
Occasionally extract the fluid from the master cylinder reservoir to
prevent overflowing.
–
Remove the bleeding syringe. Mount and tighten the bleeder screw.
Mount the protection cap.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim
F03223-10
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Use water to immediately clean up any brake fluid that has
overflowed or spilled.
SERVICE WORK ON THE CHASSIS 12
1
.
3
with membrane .
4
with the appropriate hydraulic fluid.
p. 137)
4
and mount bleeding syringe
4 mm (0.16 in)
.
77