GAS GAS EC 350F Owner's Manual page 75

–
Check chain sliding piece for wear.
» If the lower edge of the chain pins is in line with or below the
chain sliding piece:
–
Change the chain sliding piece.
–
Check that the chain sliding piece is firmly seated.
» If the chain sliding piece is loose:
–
Tighten the screw of the chain sliding piece.
Guideline
Screw, chain sliding
piece
F03216-10
–
Check the chain guide for wear.
Info
Wear can be seen on the front of the chain guide.
» If the light part of the chain guide is worn:
–
Change the chain guide.
401760-01
–
Check that the chain guide is firmly seated.
» If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining screws,
chassis
Remaining nuts,
chassis
F03217-01
Finishing work
–
Remove the motorcycle from the lift stand. (
SERVICE WORK ON THE CHASSIS 12
M8
M6
M6
15 Nm (11.1 lbf ft)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
p. 48)
73