GAS GAS EC 350F Owner's Manual page 61

–
Join plug-in connector of the brake light switch.
F03193-10
–
Position the foot brake cylinder.
3
Push rod
The dust boot is correctly positioned.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
F03195-10
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
F03191-11
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
Info
Raise the link fork slightly to be able to mount the screw
more easily.
–
Attach frame protector in area
–
Mount and tighten screws
Guideline
Screw, frame protector
–
Mount the new cable ties.
F03190-11
Finishing work
–
Check the free travel of the foot brake lever. (
–
Remove the motorcycle from the lift stand. (
SERVICE WORK ON THE CHASSIS 12
engages in the foot brake cylinder.
4
.
M6 10 Nm (7.4 lbf ft)
5
.
M14x1.5 60 Nm (44.3 lbf ft)
B
.
6
.
M10 60 Nm (44.3 lbf ft)
C
and position it.
7
with the washers.
M5 3 Nm (2.2 lbf ft)
Loctite ® 2701™
p. 83)
p. 48)
59