Installing The Shock Absorber - GAS GAS EC 350F Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.17
58
F03197-10
F03199-10

Installing the shock absorber

F03200-10
F03198-10
F03196-10
–
7
Remove nut and pull out the swingarm pivot.
–
Push the link fork back and secure it against falling over.
–
Hold the shock absorber and remove screw
–
Remove the shock absorber carefully at the bottom.
Main work
–
Carefully position the shock absorber into the vehicle from the bot-
tom.
–
1
Mount and tighten screw
Guideline
Screw, top shock M10
absorber
–
Position the link fork and mount the swingarm pivot.
Info
Pay attention to flat area
–
2
Mount and tighten nut .
Guideline
Nut, fork pivot
–
Mount the chain.
–
Connect the chain with the connecting link.
Guideline
The closed side of the chain joint lock must face in the direction
of travel.
8
.
.
60 Nm (44.3 lbf ft)
Loctite
A
.
M16x1.5 100 Nm (73.8 lbf ft)
® 2701™