Screen Size Switching - RGBlink VENUS X1 Quick Start Manual

After the digital, push the knob will add @, means before the @ is the vertical size, and after the @ is
the refresh rate. Only digital 50 or digital 60 supports for the refresh rate. Use the digital buttons to
finish the settings.
After input all the values, push knob to enable VENUS X1 to output this resolution. VENUS X1 will
take 5~10 seconds to enable this output resolution.

Screen Size Switching

VENUS X1 supports the screen parameters to meet the requirement where user want to switch
between scale screen size and full display size (like monitor). This is only enable for a single display
window. Following is an example of a screen size is1408 x 832.
Operator can defined the VENUS X1 output resolution from standard output resolution list or
customized the output resolution which is higher than1408 x 832. For this application 1440x900 is an
example:
Push the [MENU] button to go into the main menu, turn the knob and choose <OUTPUT>, push the
knob to confirm, turn the knob to choose <SCREEN PARAMETERS>, push the knob and goes into the
SCREEN PARAMETERS menus as following:
H SIZE--Horizontal pixels, turn knob or use the digital button to input the value1408.
V SIZE--Vertical pixels, turn knob or use the digital button to input the value 832.
H POS--Horizontal position, default value is 0, set the value as the way of H SIZE and V SIZE.
V POS--Vertical position, default value is 0, set the value as the way of H SIZE and V SIZE.
MODE-- Mode option, choose SCREEN SIZE.
SCREEN FOLLOW SCALE--User can enable or disable this function. When choose "ON", the size of
the screen will change according to scale setting.
RESET: If image quality distorts by improper operation, it can be recover by reset.
21
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925788216
Email: sales@rgblink.com http://www.rgblink.cn