Set The Output Resolution; Screen Size Switching - RGBlink VENUS X1 Quick Start Manual

Set the Output Resolution

Select standard resolution:
1. Push the [MENU] button to enter the menu items, turn the rotary knob, and select <OUTPUT>.
2. Push the knob to confirm, turn the rotary knob and select <STANDARD>, push the knob to confirm.
3. Turn the rotary knob again, and select the output resolution according to actual need.
Custom the output resolution:
1. Push the [MENU] button to enter the menu items, turn the rotary knob, and select <OUTPUT>.
2. Push the knob to confirm, turn the rotary knob and select <CUSTOMIZED>, push the knob to confirm.
3. Turn the knob on each digital position, and change the value of the digital by the digital buttons on the front
panel.
4. After the digital, push the knob will add *, means before * is the horizontal size. Same operation for vertical
size.
5. After the digital, push the knob will add @, means before the @ is the vertical size, and after the @ is the
refresh rate. Only digital 50 or digital 60 supports for the refresh rate. Use the digital buttons to finish the
settings.
6. After input all the values, push knob to enable VENUS X1 to output this resolution. VENUS X1 will take 5~10
seconds to enable this output resolution.

Screen Size Switching

VENUS X1 supports the screen parameters to meet the requirement where user want to switch between scale
screen size and full display size (like monitor). This is only enable for a single display window. Following is an
example of a screen size is1408 x 832.
Operator can defined the VENUS X1 output resolution from standard output resolution list or customized the
output resolution which is higher than1408 x 832. For this application 1440x900 is an example:
Push the [MENU] button to go into the main menu, turn the knob and select <OUTPUT>, push the knob to
confirm, turn the knob to select <SCREEN PARAMETERS>, push the knob and goes into the SCREEN
PARAMETERS menus as following:
H SIZE--Horizontal pixels, turn the knob or use the digital button to input 1408.
V SIZE--Vertical pixels, turn the knob or use the digital button to input 832.
H POS--Horizontal position, default 0, set the value as the way of H SIZE and V SIZE.
V POS--Vertical position, default 0, set the value as the way of H SIZE and V SIZE.
MODE-- Mode option, select SCREEN SIZE.
SCREEN FOLLOW SCALE--User can enable or disable this function. When choose "ON", the size of the screen will
change according to scale setting
RESET: If image quality distorts by improper operation, it can be recover by reset.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
19
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn