Input Size Setting & Adjust; Vga Input Auto Adjust - RGBlink VSP268S Quick Start Manual

V Position: initial parameter is 0, no setting without image movement;
Mode: Select <Screen Parameter Size > or <FS Size>;
Reset Device: Reset to default if the operation is not appropriate.
Note: User can set the screen parameter via <Full Screen > button. Press the key in first time, the key lights up
and it shows <Screen Parameter Size >, Press again, the key lights off and it shows <Full Screen Size>.
Input Size Setting & Adjust
User can adjust and set the input image based on requirement in order to realize the best effect.
Touch [MENU] button, LCD displays the main menu, rotate the knob, select <Input>, touch the knob and
confirm, rotate the knob, select <Sizing Adjust>, touch the knob and confirm, user can use knob and number key
to set as follows:
H Size: Set the width of image for scaling;
V Size: Set the height of image for scaling;
H Position: Set the image horizontal position;
V Position: Set the image verticall position;
Reset: Reset to default if the operation is not appropriate;
Top Crop: Crop the top part of image;
Buttom Crop: Crop the buttom part of image;
Left Crop: Crop the left part of image;
Right Crop: Crop the right part of image;
Crop Reset: Reset to default if the operation is not appropriate.

VGA Input Auto Adjust

Since VGA signal is off-standard, it will cause image offset or not in full screen when input VGA video, user
should adjust the VGA video as follows:
1. Touch [MENU], LCD shows the menu, rotate the knob, select <Input>, touch the knob and confirm.
11
Address：S601-607, S504 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn