Figure 72. Access To Dbgmcu Register With Iar™ Ewarm - STMicroelectronics STM32 Application Note

AN4989 Managing DBGMCU registers
IAR™ EWARM
Read/Write of DBGMCU registers is possible through the register window as shown in
Figure 72:
Figure 72. Access to DBGMCU register with IAR™ EWARM
®
In case a more permanent setup is required EWARM C-SPY debugger macros enable to
define execUserSetup(), which is executed at debugger start prior to program execution.
Figure 73 shows the Project Option Debugger -> Setup Pane.
AN4989 Rev 3 97/118
117