Figure 75. Accessing Dbgmcu Register In Keil ® Mdk-Arm Μvision (2/2)) - STMicroelectronics STM32 Application Note

Managing DBGMCU registers
Figure 75. Accessing DBGMCU register in Keil
Each bit in the register can be set or reset independently.
For a permanent debug configuration, use Keil
capability.
Debugger script files are plain text files that contain debugger commands. These files are
not created by the tools. The user must create them to suit his specific needs. Typically, they
are used to configure the debugger or to setup or initialize something prior to running the
program.
Figure 76
100/118
shows initialization script setting in Project option ->Debug Pane.
®
MDK-Arm µVision initialization file
AN4989 Rev 3
®
MDK-Arm µVision (2/2))
AN4989