Iar™ Ewarm; Figure 27. Reset Mode In Iar8.10: Screenshot - STMicroelectronics STM32 Application Note

AN4989
4.2.2 IAR™ EWARM
Reset and Connection mode are seen as a single reset mode option as shown in
•
System (default): Normal Connection. Software System Reset prior to jump at main.
•
Core: Normal Connection. Software Core Reset prior to jump at main.
•
Software: Normal Connection. No Reset prior to jump and stop at main.
•
Hardware: Normal Connection. Assert NRST MCU pin prior to jump to main.
•
Connect during reset: Connection while asserted Hardware NRST.
Hotplug connection is accessible with "Attach to running Target" function in project menu.

Figure 27. Reset Mode in IAR8.10: screenshot

AN4989 Rev 3
Connecting to the board
Figure
43/118
27.
117