Screen Components - 3Com 3C16630A User Manual

3-2 C 3: U
HAPTER
Unit ID:
Media Type:
Good Frames:
Good Octets:
Unicast Frames:
Multicast Frames:
Broadcast Frames:
Total Collisions:
Runt Frames:
AutoPartitions:
Bandwidth Used (%):
Figure 3-1 An Example Screen
Screens are divided into three main areas:
The header area, at the top of the screen, displays a title which tells you
the subject of the screen.
The main part of the screen shows management information. The
components of this part of the screen are described in
Components"
The message area, at the bottom of the screen, is used to display
information and error messages.
The displayed screens may not be identical to those illustrated in this
chapter. The contents of screens depend on your access level and the
configuration at your installation. Access levels are described in the
section

Screen Components

The main part of a typical screen contains several different types of
item.
use.
In the descriptions of the options given in this chapter, the default
values are underlined.
VT100 M
SING THE
3Com SuperStack II Port Statistics
2
Twisted Pair (10BaseT)
345
12398
34560
7
2
20
0
5
6
Source Address Changes:
Last Source Address:
CLEAR COUNTERS
on page 3-2.
"Screen Components"
Table 3-1 gives an example of each component, and explains its
I
ANAGEMENT NTERFACE
Port ID:
FCS Errors:
Alignment Errors:
Short Events:
Too Long Frames:
Very Long Events:
Data Rate Mismatches:
Late Events:
Total Errors:
Errors/10000 Packets:
5
080010013333
CANCEL
on page 3-2 .
11
10
0
0
0
1
0
0
11
0
"Screen
DUA1663-0BAA03