Table of Contents
Advertisement
3-10
C
3: U
HAPTER
Auto Logout
There is a built-in security timeout on the VT100 interface. If you do not
press any keys for three minutes, the management facility will warn
you that the inactivity timer is about to expire. If you do not press a key
within 10 seconds, the timer will expire and the screen will be locked.
(Any displayed statistics will continue to be updated, however.) When
you next press any key, the display changes to the Auto Logout screen.
This screen is shown below.
3Com
Auto
Figure 3-5 Auto Logout Screen
The Auto Logout screen requests you to enter your password again. If
the password is correctly entered, the screen that was active when the
timer expired is re-displayed. If you make a mistake in entering your
password, you will be returned to the Logon screen.
Setup
You use the Setup screen to configure IP, IPX and SLIP parameters for
the stack. This screen also provides access to other screens for you to
set up traps and serial port parameters.
VT100 M
SING THE
SuperStack
User Name:
Password:
Logout
in
OK
I
ANAGEMENT
NTERFACE
II
Auto
security
[
Progress.
Re-enter
CANCEL
Logout
]
Password...
DUA1663-0BAA03
Advertisement
Table of Contents
