3Com 3C16630A User Manual page 42

3-14 C 3: U
HAPTER
IP or IPX Address:
[123.123.40.130
[123.123.40.130
[aabbccdd:112233445566]
[123.123.36.44
[aabbccdd:112233445566]
[aabbccdd:112233445566]
[0.0.0.0
[0.0.0.0
Figure 3-7 Trap Setup Screen
IP or IPX Address (Text Field) Enter the IP or IPX address of the remote
network management station to which SNMP traps should be sent.
Community String (Text Field) The community string allows a very
simple method of authentication between the Module and the remote
network manager. You can enter any text string of up to 32 characters
(case sensitive!).
The remote network manager must be configured to look for traps sent
with this community string, otherwise it will ignore the traps. The
default community string is public.
Throttle (Text Field) To prevent a remote network manager receiving
too many traps at once, you can configure the stack to transmit traps
with a delay between each trap. If several traps are generated at once,
they will be transmitted with the specified delay between them. The
unit of throttle is one thousandth of a second. The default value is 100,
which gives a delay of one tenth of a second between each
transmission. If you set the throttle to 0, traps will be sent as soon as
they are generated.
VT100 M
SING THE ANAGEMENT
3Com SuperStack II Trap Setup
Community String:
] [public
] [public
[public
] [security
[public
[public
[public
]
[security
]
OK
I
NTERFACE
CANCEL
Throttle:
(milli-secs)
]
[1000]
]
[0 ]
]
[100 ]
]
[200 ]
]
[1500]
]
[100 ]
]
[100 ]
]
[100 ]
DUA1663-0BAA03