Repeater Resilience - 3Com 3C16630A User Manual

3-28 C 3: U
HAPTER
Figure 3-17 Repeater Setup Screen
Units Available (Read-only) This field shows how many units are
currently installed in the repeater stack.
Unit Capacity (Read-only) This shows the maximum number of units
that can be supported by this stack, in this case eight.
Total Ports Partitioned (Read-only) This field shows the number of
partitioned ports.
Repeater Health (Read-only) If all system tests have been passed on
start up or during a self-test this field will show Operational. If the field
is blank or displays any other message, check the Fault Log screen for
further information. See

Repeater Resilience

Resilient Links can be set up ONLY on Hub 10
You access the Repeater Resilience screen from the Repeater
Management screen, by selecting management level Repeater then
actuating the RESILIENCE button. The screen shows all the resilient link
pairs that are currently configured for the repeater.
VT100 M
SING THE
3Com SuperStack II Repeater Setup
Units Available:
Unit Capacity:
Total Ports Partitioned:
Repeater Health:
I
ANAGEMENT NTERFACE
2
8
0
Operational
CANCEL
"Fault Log" on page 3-47.
FMS II units.
and
DUA1663-0BAA03