Software Upgrade - 3Com 3C16630A User Manual

3-50 C 3: U
HAPTER

Software Upgrade

This option is only available to users with security access level.
When 3Com issues a new version of the Module SmartAgent software,
you can obtain the software image from 3Com bulletin board services
(see
You use the Software Upgrade screen to download software images. To
display the screen, actuate the SOFTWARE UPGRADE button on the
Main Menu screen.
3Com SuperStack II Software Upgrade
File Name should have the format FMA??_??.SLX.
Figure 3-29 Software Upgrade Screen
The filename you will download will reflect the management product
you have installed.
The protocol used for downloading is TFTP running over UDP/IP or IPX
and will only work over the network, not via the serial port. To perform
the download, a remote TFTP server must be set up.
File Name (Text Field) Enter the name of the file that contains the
software image to be downloaded to the Module. You will be
prompted with a file format appropriate to the Module. This will be
FMAxx_xxx.slx for the Management Module or FMRxx_xx.slx for the
Advanced RMON Module. You will not be allowed to download the
VT100 M
SING THE
Appendix B).
File Name:
Server Address:
This operation will reset the device
once the download has been completed.
Download State:
IP address format
OK
I
ANAGEMENT NTERFACE
[FMA03_00.SLX
[123.123.77.17
Active
d.d.d.d
CANCEL
]
]
DUA1663-0BAA03