3Com 3C16630A User Manual page 60

3-32 C 3: U
HAPTER
Unit ID:
Unit Type:
Good Frames:
Good Octets:
Unicast Frames:
Multicast Frames:
Broadcast Frames:
Total Collisions:
Runt Frames:
AutoPartitions:
Bandwidth Used (%):
Figure 3-19 Unit Statistics Screen
The screen is updated every 3 seconds. If the top limit of a counter
(4294967295) is reached, the counter will roll-over (reset to zero
automatically). After this event, the individual figures may give a false
impression of network conditions if taken in isolation.
All the fields are read-only. Refer to
description of the statistics fields.
Unit ID This field shows the identifying number of the unit you have
selected from which to collect statistics.
Unit Type This field identifies the type of unit you are managing.
CLEAR COUNTERS (Button) For users with an access level of manager
or higher. Move the cursor to this button and press [Return] to reset all
the unit statistics counters to zero. Clearing the unit's counters affects
all users, and clears the counters for all the ports on this unit.
CANCEL (Button) Move the cursor to this button and press [Return] to
go back to the Repeater Management screen without clearing the
counters.
VT100 M
SING THE
3Com SuperStack II Unit Statistics
2
SuperStack II Hub 10 12 port TP
345
12398
34560
7
2
45
123
0
0
CLEAR COUNTERS
I
ANAGEMENT NTERFACE
FCS Errors:
Alignment Errors:
Short Events:
Too Long Frames:
Very Long Events:
Data Rate Mismatches:
Late Events:
Total Errors:
Errors/10000 Packets:
OK
Appendix D
10
0
0
9
1
0
0
11
0
for a detailed
DUA1663-0BAA03