3Com 3C16630A User Manual page 8

viii A T G
BOUT HIS UIDE
situations. If you are already familiar with network management you
will be able to skip some of the information in the guide and use the
information given for reference purposes.
The guide assumes that you are familiar with VT100 terminals,
modems, PCs and SNMP. You will need to refer to other manuals for
this information. See "Other Useful Publications" on page ix.
This guide explains:
How to install the Module.
How to set up and use the management facility which is provided by
the module, in order to manage a stack.
How to access the facility locally using a VT100 terminal or a PC using
terminal emulation software.
How to access the facility remotely using a modem and a VT100
terminal or a PC using terminal emulation software.
How to access the facility remotely over a TCP/IP network using Telnet.
How to access the facility locally or remotely from a workstation
running SLIP, using Telnet or SNMP management.
This guide does not:
Show you how to install SuperStack II Hub 10 units.
Explain how to manage units using an SNMP Manager such as
Transcend WorkGroup Manager for Windows.
Provide a detailed description or copy of the MIB (Management
Information Base). You can obtain a copy of the MIB from 3Com's
bulletin board services if required. For more information, see
Appendix B.
Show you how to use your Telnet host application.
If the information in the release notes shipped with your product differs
from the information in this guide, follow the release notes.