Table of Contents
Advertisement
The screen shows the following fields:
Unit ID (Read-only) This field shows the unit to which the port belongs.
Port ID (Read-only) This field shows the identifier of the port you
selected to set up.
Media Type (Read-only) This field indicates the media type of the
port. Use
Table 3-4 Media Types
Media Type
AUI
Modular Male AUI
Modular Female AUI
Thin Coax (10Base2) †
Twisted Pair (10BASE-T) †
Fiber (10BaseFL) †
Bridge †
Not Fitted
† These media types may be prefaced by "Modluar" to indicate a tranceiver module is fitted.
Port State (Choice Field) Enabled / Disabled
The default state of a port is enabled. If you do not wish to use a port,
set it to Disabled to prevent unauthorized access to the network.
You cannot enable or disable a port that is the main or standby port of
a resilient link pair.
Security (Choice Field) Enabled/Disabled
All SuperSatck II Hub 10 units, all LinkBuilder FMS II 3C16665 and 3C16672
modules, and other LinkBuilder FMS II Modules with serial number prefixes
of 0200 or greater, offer the more sophisticated security function detailed
DUA1663-0BAA03
Table 3-4
to determine the media type.
Repeater Management
Description
Standard AUI (female) connection with no internal
transceiver.
Male AUI connection with internal transceiver.
Female AUI connection with no internal
transceiver.
Standard BNC Thin Ethernet connection.
Twisted Pair RJ45 connection.
Fiber ST connection (10BaseFL / FOIRL).
Standard AUI (female) connection.
No transceiver is installed.
3-37
Advertisement
Table of Contents
