A
BOUT
A Word about Safety
Please pay careful attention to the Warning and Safety Information
panels that appear throughout this guide. These panels give
information that will protect YOU and the SuperStack II equipment.
Look for the Warning symbol,
which always accompanies the appropriate message.
WARNING: Installation and Removal of the SuperStack II Hub 10
Management Module or Advanced RMON Module must only be carried
out by Qualified Personnel.
About this User Guide
This guide describes how to install the SuperStack II Hub 10
Management Module and SuperStack II Hub 10 Advanced RMON
Module and use them to manage SuperStack II stacks via the VT100
interface or an SNMP application. A stack is one or more units (such as
SuperStack II Hub 10 12 Port TP) which you connect together to
function and manage as a single logical repeater.
Throughout this guide, Module can be taken to refer to either product.
The guide is written for the system or network administrator who is
responsible for setting up devices used on the network. If you are using
management on your network for the first time it is possible you will
make mistakes. We have tried to identify the likely errors you may make
and have provided hints and tips to help you recover from error
T
G
HIS
UIDE
Need help?
Do you have a question about the 3C16630A and is the answer not in the manual?
Questions and answers