Skp16C62P Board Specifications; Hardware Specifications; Operating Environment - Renesas SKP16C62P User Manual

7.0 SKP16C62P Board Specifications

7.1 Hardware Specifications

Table 7-1 lists the specifications of the SKP16C62P Board.
Table 7-1. SKP16C62P Board Specifications
MCU
Clocks
Memory (Internal
with KD30 + ICD)
Connectors
Jumpers
Switches
LED's
LCD
7.2 Power Supply Requirements
The SKP16C62P Board will draw 35mA (max). With the ICD, the current draw will be about
75mA.

7.3 Operating Environment

Table 7-3 lists the environmental conditions for using and storing the SKP16C62P board. When
storing the board, place it in a conductive bag and then in the packing box your product was
shipped in from the factory.
Table 7-2. Operating Environment
Environmental Condition
Operating
Storage
SKP16C62P User's Manual Rev. 1.0
Downloaded from Elcodis.com electronic components distributor
Item
M30626FHPGP
Main Clock: 12MHz crystal (16MHz max), ceramic resonator, ring
Sub Clock: 32.768KHz crystal
RAM: 31kB (31616 Bytes)
High E/W Data Block: 4kB
Flash ROM: 382kB (391,423 Bytes)
[J5]: Serial interface connector (UART1 for KD30 + ICD)
[J1-J4]: 50 pin (user supplied) header (for user target connection)
[JP1]: MCU Power for Icc Measurements
[JP2]: Xout to main crystal Y2
[S1]: pushbutton (connected to P8_3)
[S2]: pushbutton (connected to P8_2)
[S3]: pushbutton (connected to P8_1)
[S4]: pushbutton (connected to Reset)
[D1] (Red): User output (connected to P8_0)
[D2] (Yellow): User output (connected to P7_4)
[D3] (Green): User output (connected to P7_2)
2-line x 8-character LCD with KS0066 controller IC
0 - 55°C
(No corrosive gas allowed)
-30 to 75°C
(No corrosive gas allowed)
Specification
oscillator, or PLL (24MHz max)
Ambient Temperature
14 / 22
Applications Engineering
Ambient Humidity
30 to 80% (non-condensing)
30 to 80% (non-condensing)
December 2003